Does the necessary cleaning improve the efficiency of the machine lamp?
machine work lamp is a kind of lamb tool, it is also used for lighting, but it is in the special environment of lighting, it is mainly used for large-scale construction work, accident rescue, relief and other places, such as: night of the practice of disaster relief, you need this machine work lamp, it needs to be in the right environment to play the role of it * *. the principle is that as the filament heats up, the tungsten atoms are vaporized and moved towards the glass wall. as they approach the glass wall, the tungsten vapor is cooled to about 800℃ and combines with the halogen atoms to form tungsten halide (tungsten iodide or tungsten bromide). tungsten halide continues to move toward the center of the glass tube and returns to the oxidized filament. because tungsten halide is a very unstable compound, when heated, it will decompose again into halogen vapor and tungsten, so that tungsten deposits on the filament to make up for the evaporation. through this regeneration cycle, the filament life is not only greatly extended (nearly four times that of an incandescent lamp), but also because the filament can operate at higher temperatures, resulting in higher brightness, higher color temperature and higher luminous efficiency. the basic luminescence principle of halogen tungsten lamp is the same as that of incandescent lamp. the difference is that the halotungsten lamp is filled with a special working gas composed of 95% mixture (dibromomethane and krypton) and 5% high purity nitrogen, which establishes the halotungsten cycle within the bulb. the specific process is that after volatilization of tungsten in the filament, it will move to the place with lower temperature, and then combine with br at the tube wall to generate wbr2. at higher temperatures, wbr2 will decompose again, and the w generated will return to the filament, and br will return to the working gas. this is the whole process of the tungsten halogen cycle. through such halogen tungsten cycle, the tungsten on the filament will not gradually volatilize, because of the hot spot effect but the filament is burned, and the tungsten will not be blackened because of the deposit on the bulb shell, its life is greatly extended.
according to its light source form, machine tool work lamp can be halogen tungsten explosion-proof working lamp, waterproof explosion-proof fluorescent working lamp, incandescent working lamp, machine tool working l the lamp pole of the working lamp of the machine tool has short pole, two pole and three pole, the length and angle of the use of any adjustment and selection; the installation form of machine tool working lamp is screw fixed and magnet adsorption two kinds; both halogen tungsten light source machine tool floodlight or waterproof explosion-proof working lamp and machine tool working lamp are suitable for all kinds of large and medium-sized cnc machine tools, combination machine tools, machining centers and ordinary machine tools lighting.
in order to ensure the efficiency of the use of machine work lamp, we should pay attention to their use, including:
1. the installation of the machine work lamp should have its lighting scope, the stress condition of the installation form, the reasonable distribution of the line and so on should be taken into account. if the first installation is not good, the remaining progress will be inevitably affected.
2.each kind of lamps and lanterns to the outside of the induction is not the same, for the machine tool working lamp, to keep in the normal temperature range as far as possible, so that it can play the maximum effect, but also recommended to reduce unnecessary losses caused by this external factors.
3. necessary cleaning is an indispensable link of the machine tool working lamp, including reasonable wiping, necessary detection of the internal circuit, reasonable replacement of the circuit switch, etc., which is a reasonable premise to keep the machine tool lamp working normally as far as possible.
众多企业争夺智能家居入口 绿色环保成家装行业主流
橡塑保温板厂家产品价格
浅析气动蝶阀的常见故障分析及日常保养
ADVU-63-25-P-A现货ADVU
油液粘度过高会引起齿轮泵温度过高吗？
Does the necessary cleaning improve the efficiency of the machine lamp?
lenze变频器报警代码oc1过流故障修理厂家
KAPPKNMX系列齿轮测量设备
直流电阻箱 型号:SLB18-ZX78 库号：M212781
JUMO恒温器602025四个使用要点及使用注意事项
碳钢新式自清洗过滤器功能介绍
德国贺德克传感器选购依据
带式压滤机的构成主要有哪些
这是真没想到，个人碳账户这么快就来了！
橡塑保温管的性能以及参数
为什么有些贺德克滤芯损耗的很快？
5G商用！乐鸟智慧消防插上腾飞羽翼，消防新时代来临
导波雷达液位计_雷达液位计_罗斯蒙特雷达液位计
江苏大学钱坤喜成功研制永磁轴承在离心泵的成功应用
朗科地磅*销售
according to its light source form, machine tool work lamp can be halogen tungsten explosion-proof working lamp, waterproof explosion-proof fluorescent working lamp, incandescent working lamp, machine tool working l the lamp pole of the working lamp of the machine tool has short pole, two pole and three pole, the length and angle of the use of any adjustment and selection; the installation form of machine tool working lamp is screw fixed and magnet adsorption two kinds; both halogen tungsten light source machine tool floodlight or waterproof explosion-proof working lamp and machine tool working lamp are suitable for all kinds of large and medium-sized cnc machine tools, combination machine tools, machining centers and ordinary machine tools lighting.
in order to ensure the efficiency of the use of machine work lamp, we should pay attention to their use, including:
1. the installation of the machine work lamp should have its lighting scope, the stress condition of the installation form, the reasonable distribution of the line and so on should be taken into account. if the first installation is not good, the remaining progress will be inevitably affected.
2.each kind of lamps and lanterns to the outside of the induction is not the same, for the machine tool working lamp, to keep in the normal temperature range as far as possible, so that it can play the maximum effect, but also recommended to reduce unnecessary losses caused by this external factors.
3. necessary cleaning is an indispensable link of the machine tool working lamp, including reasonable wiping, necessary detection of the internal circuit, reasonable replacement of the circuit switch, etc., which is a reasonable premise to keep the machine tool lamp working normally as far as possible.
众多企业争夺智能家居入口 绿色环保成家装行业主流
橡塑保温板厂家产品价格
浅析气动蝶阀的常见故障分析及日常保养
ADVU-63-25-P-A现货ADVU
油液粘度过高会引起齿轮泵温度过高吗？
Does the necessary cleaning improve the efficiency of the machine lamp?
lenze变频器报警代码oc1过流故障修理厂家
KAPPKNMX系列齿轮测量设备
直流电阻箱 型号:SLB18-ZX78 库号：M212781
JUMO恒温器602025四个使用要点及使用注意事项
碳钢新式自清洗过滤器功能介绍
德国贺德克传感器选购依据
带式压滤机的构成主要有哪些
这是真没想到，个人碳账户这么快就来了！
橡塑保温管的性能以及参数
为什么有些贺德克滤芯损耗的很快？
5G商用！乐鸟智慧消防插上腾飞羽翼，消防新时代来临
导波雷达液位计_雷达液位计_罗斯蒙特雷达液位计
江苏大学钱坤喜成功研制永磁轴承在离心泵的成功应用
朗科地磅*销售