How to maintain the automatic sealing machine
life span refers to the life span of the organism from birth through development, growth, maturation, aging, and death. the life span between the world and all things is as small as cells and even the molecular atoms that make up substances, as large as humans and animals. so extending life span should be the common desire of every body, in short, is how to maintain the automatic sealing machine in daily work:
facts have proved that regular maintenance of the sealing machine is an effective way to maintain the life of the machine, which indirectly saves costs for the company, so maintenance is very necessary
the first thing to note is that except for operators and maintenance personnel, other personnel are forbidden to perform maintenance operations on the equipment. in addition, turn off the power before maintenance to avoid danger.
1. before working every day, air pressure must be used to blow the machine and conveyor belt to keep it clean.
2. when there is shrinkage film residue found at the knife edge of the sealing knife, please use a cotton towel to gently remove the residue on the surface (when the sealing knife is warm). it is forbidden to use metal to wipe, because metal friction will break the knife
the protective film reduces the function of the sealing knife.
3. maintenance of residual material recovery axle:
(1) maintain once a month.
(2) remove the fixing nut of the first wheel, take out the spring and the collecting wheel.
(3) apply butter on the contact surface between the shaft and the recovery wheel to keep the collection wheel running smoothly.
(4) reinstall the collecting wheel and spring, and fix the nut.
4. chain and sprocket maintenance: maintenance is about once every three months, first remove the protective cover, apply butter to the contact gap between the chain and the sprocket, and reinstall the protective cover after maintenance.
5. bearing and bearing housing maintenance: maintenance is about once every three months. the part where the bearing and the bearing housing are installed on the machine table must be dripped with hydraulic oil in the contact gap between the bearing and the spindle to maintain lubrication.
6. check whether the fixing screw of the cutter is tightly locked, and if it is loose, lock it tightly (once a month).
7. the belt will loosen after running for a period of time. if the belt cannot drive tightly, adjust the belt tightness.
8. if the teflon on the cutting knife falls off, which will cause the film to stick to the cutting knife, the cutting knife needs to be replaced with teflon or a new sealing knife.
9. check whether the teflon tape on the sealing silicone strip is damaged. if it is damaged, it needs to be replaced.
田间小气候环境观测仪及时掌握农田气象状况
三通道直流电阻测试仪功能讲解
直埋保温管内表面缺陷如何控制？
膨胀防火包400型一立方多少钱
电子电路调试常见故障原因及查找故障的方法
How to maintain the automatic sealing machine
除尘器袋笼出现弯曲是有哪些原因造成的？
这样的刮板排屑机，你了解吗？
电厂30WLED防爆灯型号
铣床产生噪声的原因
温湿度对照设定方法
武汉25kg标准砝码/25公斤铸铁砝码电梯检测
材料的蠕变机理
更快捷的高温合金及钛材料立铣
气动切断阀检修主要包括哪些内容？
汞监测战略将制定 汞监测市场迎来发展新局面
.液体涡轮流量计和电磁流量计的区别
怎样正确使用翼闸
D971F电动对夹式碟阀的特点及技术参数和性能
电动牙刷应用蒲微防水透气膜的原因分析
facts have proved that regular maintenance of the sealing machine is an effective way to maintain the life of the machine, which indirectly saves costs for the company, so maintenance is very necessary
the first thing to note is that except for operators and maintenance personnel, other personnel are forbidden to perform maintenance operations on the equipment. in addition, turn off the power before maintenance to avoid danger.
1. before working every day, air pressure must be used to blow the machine and conveyor belt to keep it clean.
2. when there is shrinkage film residue found at the knife edge of the sealing knife, please use a cotton towel to gently remove the residue on the surface (when the sealing knife is warm). it is forbidden to use metal to wipe, because metal friction will break the knife
the protective film reduces the function of the sealing knife.
3. maintenance of residual material recovery axle:
(1) maintain once a month.
(2) remove the fixing nut of the first wheel, take out the spring and the collecting wheel.
(3) apply butter on the contact surface between the shaft and the recovery wheel to keep the collection wheel running smoothly.
(4) reinstall the collecting wheel and spring, and fix the nut.
4. chain and sprocket maintenance: maintenance is about once every three months, first remove the protective cover, apply butter to the contact gap between the chain and the sprocket, and reinstall the protective cover after maintenance.
5. bearing and bearing housing maintenance: maintenance is about once every three months. the part where the bearing and the bearing housing are installed on the machine table must be dripped with hydraulic oil in the contact gap between the bearing and the spindle to maintain lubrication.
6. check whether the fixing screw of the cutter is tightly locked, and if it is loose, lock it tightly (once a month).
7. the belt will loosen after running for a period of time. if the belt cannot drive tightly, adjust the belt tightness.
8. if the teflon on the cutting knife falls off, which will cause the film to stick to the cutting knife, the cutting knife needs to be replaced with teflon or a new sealing knife.
9. check whether the teflon tape on the sealing silicone strip is damaged. if it is damaged, it needs to be replaced.
田间小气候环境观测仪及时掌握农田气象状况
三通道直流电阻测试仪功能讲解
直埋保温管内表面缺陷如何控制？
膨胀防火包400型一立方多少钱
电子电路调试常见故障原因及查找故障的方法
How to maintain the automatic sealing machine
除尘器袋笼出现弯曲是有哪些原因造成的？
这样的刮板排屑机，你了解吗？
电厂30WLED防爆灯型号
铣床产生噪声的原因
温湿度对照设定方法
武汉25kg标准砝码/25公斤铸铁砝码电梯检测
材料的蠕变机理
更快捷的高温合金及钛材料立铣
气动切断阀检修主要包括哪些内容？
汞监测战略将制定 汞监测市场迎来发展新局面
.液体涡轮流量计和电磁流量计的区别
怎样正确使用翼闸
D971F电动对夹式碟阀的特点及技术参数和性能
电动牙刷应用蒲微防水透气膜的原因分析