美国teledyne过程分析仪表专用传感器选型
美国teledyne过程分析仪表专用传感器选型
美国teledyne过程分析仪表专用传感器选型
application overview
rangebackground gasteledyne instrumentssensor optionstraceless than 1000 ppm co2 in the background gas311, 316, 317, 318, 3160b-2c3000t seriesl-2cmore than 1000 ppm up to 99% co2 in the background gasall trace oxygen instrumentsa-2cnote: to use the a-2c or b-2c sensor in a 3000tseries instrument, adapter part number b66378 is required.note: the l-2c sensor cannot be used in our olderanalog models (300 series).percentless than 1000 ppm co2 in the background gas311p, 320a / p / brc, 326, 327, 328b-1, b-3 standard;
c-3 for high concentration of o2more than 1000 ppm up to 99% co2 in the background gasa-5
selecting a teledyne oxygen sensor - detail
class
(click for spec control drwg.)part no.applicationcommentsa-1
oxygen sensorc6689-a1ultra-fast response (90% in less than 4 seconds)in the percent oxygen region.use only when b-1 response time is insufficient.a-2c
oxygen sensorc6689-a2cused for trace o2 measurements in co2 containingbackgrounds (0.1-99% co2). co2 must be present.use where acid gases are present (co2, hcl, hcn,etc). co2 must be present.a-2cxl
oxygen sensorb74033-a2cxlspecially qualified a2c sensor to operate in xlmodel analyzers. low range limit is 0-1 ppm.use where acid gases are present (co2, hcl, hcn,etc). co2 must be present. a-2cl:obsolete, use a-2c a-3:obsolete, use a-5a-5
oxygen sensorc6689-a5intermittent or continuous monitoring of percento2 in gas mixtures containing 0-99% co2. 90% response is time is45 seconds.has more tolerance to exposure to air than a-3. norestrictions on co2 concentration.b-1
oxygen sensorc6689-b1general purpose percent oxygen analysis where fastresponse is desired (90% in less than 7 seconds).use b-3 or c-3 where longer life is required andresponse time is relatively unimportant. may be used to spot checkflue gas.b-2c
oxygen sensorc6689-b2cgeneral purpose trace o2 analysis for use in inertgas and hydrocarbon streams. low range limit is 0-10 ppm.may be used in co2 free gas streams containinghighly gases such as h2, he and ethylene.insta trace
oxygen sensorb71875special patented construction provides rapidrecovery, during initial cell installation, to low ppm levels byreducing the recovery period from several hours to just minutes.low range limit is 0-10 ppm.used for trace o2 analysis in inert gas andhydrocarbon streams.b-2cxl
oxygen sensorc6689-b2cxlspecially qualified b-2c sensor to operate in xlmodel analyzers. low range limit is 0-1 ppm.may be used in co2 free gas streams containinghighly gases such as h2, he and ethylene.b-3
oxygen sensorc6689-b3percent o2 analysis, best compromise between longlife and fast response.may be used to spot check flue gas.b-4c
oxygen sensorc14613-b4ctrace o2 cell specifically designed for the model317exi.same performance as the b-2.b-5
oxygen sensorc45091-b5special application cell (non-standard) where longlife and moderately fast response are required; b-5 has a factor of3x the life of a b-3.requires 3x the amplifier gain of the b-3.expected life is 36 months in air.b-5f
oxygen sensorc45091-b5fspecial application cell (non-standard) where longlife and moderately fast response, in the presence of co2, arerequired.uses type f (acid electrolyte). requires higheramplifier gain than normal. 90% response time is 13 seconds.expected life in air is 6 months.b-7
oxygen sensorb45091-b7special application cell (non-standard) where fastresponse is required; the b-7 has a factor of 3x the life of a b-1cell.requires 3x the amplifier gain of the b-1.expected life in air is 24 months.b-7f
oxygen sensorb45091-b7fspecial application cell (non-standard) wheremoderate life and fast response, in the presence of co2, arerequired.requires higher amplifier gain than normal. 90%response time is 7 seconds. expected life in air is 3 months.c-1
oxygen sensorc6689-c1rarely used. schematic for referenceonly.c-2
oxygen sensorc6689-c2rarely used. schematic for referenceonly.c-3
oxygen sensorc6689-c3percent o2 measurements where maximum cell life isdesired (high o2 applications).90% response time is 30 seconds. expected life inair is 18 months.c-5
oxygen sensorc45091-c5special application cell (non-standard) where longlife is required; the c-5 has a factor of 3x the life of a c-3cell.requires 3x the amplifier gain of the c-3.expected life in air is 54 months.c-5f
oxygen sensorc45091-c5fspecial application cell (non-standard) where long life, in thepresence of co2, is required.requires higher amplifier gain than normal. 90% response timeis 30 seconds. expected life in air is 9 months.c-6
oxygen sensorc54090-c6motion insensitive percent o2 measurements for use in hａnd heldportable monitors.best cell for oem safety applications.e-1
oxygen sensorc14991-e1special cell with performance characteristic of the c-3 with 5xthe life.cell is 2 to 3 times the length of standard mfcs; requiresspecial mounting. designed for medical oxygen concentrators.e-2
oxygen sensorc57283-e2long life cell for use is the model 3290 (for use in unattendedair liquefaction nitrogen skids).has a 3 to 4 years expected life in air. minimum range 0-1000ppm.f-1rc40371-f1r0-1000 ppm co in airused in max 5 and 9950 portable combustion analyzersf-3c55194-f3rarely used. schematic for referenceonly.insta trace - co2b73016special patented construction provides rapidrecovery, during initial cell installation, to low ppm levels byreducing the recovery period from several hours to just minutes.used for trace o2 measurements in co2 containing backgrounds(0-99% co2) in the 3000t analyzer series.use where acid gases are present (co2, hcl, hcn,etc). co2 must be present. the insta trace micro-fuel cell oxygensensor is capable of measuring below 1 ppm of oxygen within 15minutes of installation.insta trace - xl
oxygen sensorb73592special patented construction provides rapidrecovery, during initial cell installation, to low ppm levels byreducing the recovery period from several hours to just minutes.specially qualified sensor to operate in xl model analyzers with alow range limit of 0-1 ppm.used for trace o2 analysis in inert gas andhydrocarbon streams.k-1
oxygen sensorc43832-k1smallest micro-fuel cell, for use in applications where smallsize or multiple sensing requirements exist.oem applications; pc board mountable. k-2:obsoletel-2c
oxygen sensorc6689-l2cused for general purpose trace oxygen analysis in the 3000tanalyzer series.has a 2 year expected life.l-2cxl
oxygen sensorc6689-l2cxlspecially qualified l2c sensor to be used in 3000xl analyzerseries. low range limit is 0-1 ppm.may be used in co2 free gas streams containing highly gases such as h2, he and ethylene.l-2ci
oxygen sensorc6689-l2ciused in the model 3000t series for trace o2 measurements; useonly in co2 and h2 background mixtures (e.g. inert gas generators).co2 concentration should be within +/-20% about some nominalconcentration.s-2c
oxygen sensorc6689-s2ctrace oxygen cell for use in turbo2 analyzer. provides rapidrecovery from air calibration (approximately 20 minutes).low range limit is 0-100 ppm. has three pin contact system.z-2c
oxygen sensorc6689-z2chas the same features as the s-2, except configured for use inthe model 3190.low range limit is 0-100 ppm. has normal micro-fuel cellcontact plate.
storage recommendations for micro-fuelcells
after the micro-fuel cell barrier bag is sealed, the sensor (cell)continues to react with the oxygen inside the bag.
eventually, all of the oxygen is consumed and the cell remains inan inert oxygen-free atmosphere until the bag is opened.
the barrier bag transmits negligible amounts of oxygen and othergases, and almost no moisture. thus the cell can be stored forperiods up to 6 months and still provide 90% or better of itsexpected life when finally placed into use.
loss of sensor life in storage can be minimized by following anumber of practical stocking procedures.
1) never remove the cell from the barrier bag until the cell isready to be used.
2) store the sealed cell in a cool storage chamber. storagetemperature can be room temperature or below. a range of 10 to 22celsius is satisfactory.
3) avoid any prolonged storage in warm or dry environments. do notstore the cells in an area that is exposed to direct sunlight.
4) maintain careful records of the serial numbers for cells putinto stock and for those supplied out of stock. cells should besupplied from stock on a first-in, first-out basis.
5) schedule stock cell orders to coincide with the expected needａnd thereby minimize cell storage periods. although it is possibleto store the cells for reasonably long periods and still maintaincell life, it is advisable to exercise strict discipline in thismatter. for instance, set a stock period target of three months. bysetting a goal to turn over stock every three months, cell lifewill be maximized and warranty issues minimized.
上一篇：美盛科技中国有限公司专业销售gpr/xlt/psr氧传感器adv/aii氧燃料电池以及分析仪表
下一篇：美国teledyne分析仪表同美盛科技中国建立销售和服务合作关系
厢式压滤机过滤部分是怎样工作的
粉末冶金测量密度和有效孔隙率的含油率的防水处理的方法
串联电伴热带安装有哪些注意事项
功率放大器主要技术要求是什么
变压器耐压试验的难点及解决方法
美国teledyne过程分析仪表专用传感器选型
压缩活性炭的用途有哪些
冲床周边自动化辅助设备 三合一开平送料机 三合一伺服送料机
MY10-03 34420A兆欧表 美国安捷伦Agilent
介绍五种FEM1.02FT.18S型德国KNF计量泵的故障解决方法
仪器的一般维护与保养方法
一文看懂限速器测试仪的操作规程
FESTO电磁阀预防措施介绍
ZB-6电缆故障定位仪的组成及特点
GB5725安全网燃烧测试仪的标准要求
Z44H快速排污阀性能
力士乐减压阀DR6DP有哪些特性呢一起了解下
气动卡盘性能优势
回收二手钛材蒸发器的优势特点分析
菲尼克斯phoenix1424089网络电缆
美国teledyne过程分析仪表专用传感器选型
application overview
rangebackground gasteledyne instrumentssensor optionstraceless than 1000 ppm co2 in the background gas311, 316, 317, 318, 3160b-2c3000t seriesl-2cmore than 1000 ppm up to 99% co2 in the background gasall trace oxygen instrumentsa-2cnote: to use the a-2c or b-2c sensor in a 3000tseries instrument, adapter part number b66378 is required.note: the l-2c sensor cannot be used in our olderanalog models (300 series).percentless than 1000 ppm co2 in the background gas311p, 320a / p / brc, 326, 327, 328b-1, b-3 standard;
c-3 for high concentration of o2more than 1000 ppm up to 99% co2 in the background gasa-5
selecting a teledyne oxygen sensor - detail
class
(click for spec control drwg.)part no.applicationcommentsa-1
oxygen sensorc6689-a1ultra-fast response (90% in less than 4 seconds)in the percent oxygen region.use only when b-1 response time is insufficient.a-2c
oxygen sensorc6689-a2cused for trace o2 measurements in co2 containingbackgrounds (0.1-99% co2). co2 must be present.use where acid gases are present (co2, hcl, hcn,etc). co2 must be present.a-2cxl
oxygen sensorb74033-a2cxlspecially qualified a2c sensor to operate in xlmodel analyzers. low range limit is 0-1 ppm.use where acid gases are present (co2, hcl, hcn,etc). co2 must be present. a-2cl:obsolete, use a-2c a-3:obsolete, use a-5a-5
oxygen sensorc6689-a5intermittent or continuous monitoring of percento2 in gas mixtures containing 0-99% co2. 90% response is time is45 seconds.has more tolerance to exposure to air than a-3. norestrictions on co2 concentration.b-1
oxygen sensorc6689-b1general purpose percent oxygen analysis where fastresponse is desired (90% in less than 7 seconds).use b-3 or c-3 where longer life is required andresponse time is relatively unimportant. may be used to spot checkflue gas.b-2c
oxygen sensorc6689-b2cgeneral purpose trace o2 analysis for use in inertgas and hydrocarbon streams. low range limit is 0-10 ppm.may be used in co2 free gas streams containinghighly gases such as h2, he and ethylene.insta trace
oxygen sensorb71875special patented construction provides rapidrecovery, during initial cell installation, to low ppm levels byreducing the recovery period from several hours to just minutes.low range limit is 0-10 ppm.used for trace o2 analysis in inert gas andhydrocarbon streams.b-2cxl
oxygen sensorc6689-b2cxlspecially qualified b-2c sensor to operate in xlmodel analyzers. low range limit is 0-1 ppm.may be used in co2 free gas streams containinghighly gases such as h2, he and ethylene.b-3
oxygen sensorc6689-b3percent o2 analysis, best compromise between longlife and fast response.may be used to spot check flue gas.b-4c
oxygen sensorc14613-b4ctrace o2 cell specifically designed for the model317exi.same performance as the b-2.b-5
oxygen sensorc45091-b5special application cell (non-standard) where longlife and moderately fast response are required; b-5 has a factor of3x the life of a b-3.requires 3x the amplifier gain of the b-3.expected life is 36 months in air.b-5f
oxygen sensorc45091-b5fspecial application cell (non-standard) where longlife and moderately fast response, in the presence of co2, arerequired.uses type f (acid electrolyte). requires higheramplifier gain than normal. 90% response time is 13 seconds.expected life in air is 6 months.b-7
oxygen sensorb45091-b7special application cell (non-standard) where fastresponse is required; the b-7 has a factor of 3x the life of a b-1cell.requires 3x the amplifier gain of the b-1.expected life in air is 24 months.b-7f
oxygen sensorb45091-b7fspecial application cell (non-standard) wheremoderate life and fast response, in the presence of co2, arerequired.requires higher amplifier gain than normal. 90%response time is 7 seconds. expected life in air is 3 months.c-1
oxygen sensorc6689-c1rarely used. schematic for referenceonly.c-2
oxygen sensorc6689-c2rarely used. schematic for referenceonly.c-3
oxygen sensorc6689-c3percent o2 measurements where maximum cell life isdesired (high o2 applications).90% response time is 30 seconds. expected life inair is 18 months.c-5
oxygen sensorc45091-c5special application cell (non-standard) where longlife is required; the c-5 has a factor of 3x the life of a c-3cell.requires 3x the amplifier gain of the c-3.expected life in air is 54 months.c-5f
oxygen sensorc45091-c5fspecial application cell (non-standard) where long life, in thepresence of co2, is required.requires higher amplifier gain than normal. 90% response timeis 30 seconds. expected life in air is 9 months.c-6
oxygen sensorc54090-c6motion insensitive percent o2 measurements for use in hａnd heldportable monitors.best cell for oem safety applications.e-1
oxygen sensorc14991-e1special cell with performance characteristic of the c-3 with 5xthe life.cell is 2 to 3 times the length of standard mfcs; requiresspecial mounting. designed for medical oxygen concentrators.e-2
oxygen sensorc57283-e2long life cell for use is the model 3290 (for use in unattendedair liquefaction nitrogen skids).has a 3 to 4 years expected life in air. minimum range 0-1000ppm.f-1rc40371-f1r0-1000 ppm co in airused in max 5 and 9950 portable combustion analyzersf-3c55194-f3rarely used. schematic for referenceonly.insta trace - co2b73016special patented construction provides rapidrecovery, during initial cell installation, to low ppm levels byreducing the recovery period from several hours to just minutes.used for trace o2 measurements in co2 containing backgrounds(0-99% co2) in the 3000t analyzer series.use where acid gases are present (co2, hcl, hcn,etc). co2 must be present. the insta trace micro-fuel cell oxygensensor is capable of measuring below 1 ppm of oxygen within 15minutes of installation.insta trace - xl
oxygen sensorb73592special patented construction provides rapidrecovery, during initial cell installation, to low ppm levels byreducing the recovery period from several hours to just minutes.specially qualified sensor to operate in xl model analyzers with alow range limit of 0-1 ppm.used for trace o2 analysis in inert gas andhydrocarbon streams.k-1
oxygen sensorc43832-k1smallest micro-fuel cell, for use in applications where smallsize or multiple sensing requirements exist.oem applications; pc board mountable. k-2:obsoletel-2c
oxygen sensorc6689-l2cused for general purpose trace oxygen analysis in the 3000tanalyzer series.has a 2 year expected life.l-2cxl
oxygen sensorc6689-l2cxlspecially qualified l2c sensor to be used in 3000xl analyzerseries. low range limit is 0-1 ppm.may be used in co2 free gas streams containing highly gases such as h2, he and ethylene.l-2ci
oxygen sensorc6689-l2ciused in the model 3000t series for trace o2 measurements; useonly in co2 and h2 background mixtures (e.g. inert gas generators).co2 concentration should be within +/-20% about some nominalconcentration.s-2c
oxygen sensorc6689-s2ctrace oxygen cell for use in turbo2 analyzer. provides rapidrecovery from air calibration (approximately 20 minutes).low range limit is 0-100 ppm. has three pin contact system.z-2c
oxygen sensorc6689-z2chas the same features as the s-2, except configured for use inthe model 3190.low range limit is 0-100 ppm. has normal micro-fuel cellcontact plate.
storage recommendations for micro-fuelcells
after the micro-fuel cell barrier bag is sealed, the sensor (cell)continues to react with the oxygen inside the bag.
eventually, all of the oxygen is consumed and the cell remains inan inert oxygen-free atmosphere until the bag is opened.
the barrier bag transmits negligible amounts of oxygen and othergases, and almost no moisture. thus the cell can be stored forperiods up to 6 months and still provide 90% or better of itsexpected life when finally placed into use.
loss of sensor life in storage can be minimized by following anumber of practical stocking procedures.
1) never remove the cell from the barrier bag until the cell isready to be used.
2) store the sealed cell in a cool storage chamber. storagetemperature can be room temperature or below. a range of 10 to 22celsius is satisfactory.
3) avoid any prolonged storage in warm or dry environments. do notstore the cells in an area that is exposed to direct sunlight.
4) maintain careful records of the serial numbers for cells putinto stock and for those supplied out of stock. cells should besupplied from stock on a first-in, first-out basis.
5) schedule stock cell orders to coincide with the expected needａnd thereby minimize cell storage periods. although it is possibleto store the cells for reasonably long periods and still maintaincell life, it is advisable to exercise strict discipline in thismatter. for instance, set a stock period target of three months. bysetting a goal to turn over stock every three months, cell lifewill be maximized and warranty issues minimized.
上一篇：美盛科技中国有限公司专业销售gpr/xlt/psr氧传感器adv/aii氧燃料电池以及分析仪表
下一篇：美国teledyne分析仪表同美盛科技中国建立销售和服务合作关系
厢式压滤机过滤部分是怎样工作的
粉末冶金测量密度和有效孔隙率的含油率的防水处理的方法
串联电伴热带安装有哪些注意事项
功率放大器主要技术要求是什么
变压器耐压试验的难点及解决方法
美国teledyne过程分析仪表专用传感器选型
压缩活性炭的用途有哪些
冲床周边自动化辅助设备 三合一开平送料机 三合一伺服送料机
MY10-03 34420A兆欧表 美国安捷伦Agilent
介绍五种FEM1.02FT.18S型德国KNF计量泵的故障解决方法
仪器的一般维护与保养方法
一文看懂限速器测试仪的操作规程
FESTO电磁阀预防措施介绍
ZB-6电缆故障定位仪的组成及特点
GB5725安全网燃烧测试仪的标准要求
Z44H快速排污阀性能
力士乐减压阀DR6DP有哪些特性呢一起了解下
气动卡盘性能优势
回收二手钛材蒸发器的优势特点分析
菲尼克斯phoenix1424089网络电缆